Hot
New
In stock
Out of stock

Rubio Monocoat Creative Effects Sample Kit

SKU: MC Spl Set/CE

$260.00

The Creative Effects Sample Kit allows you to create unique, one of a kind effects.  

Rubio Monocoat Creative Effects Sample Kit Includes:

100 ml Sample Bottles

  • 14 Pre-Color Easy
  • 1 Rubio Smoke
  • 1 Rubio Fumed

Rubio Monocoat Precolor Easy was specially developed to create contrast effects to be used in combination with the many oil finish colors of the Rubio Monocoat Range.

The precolor stains the wood to your desired color.

The pretreatment products offer no protection, so they must be finished with Rubio Monocoat Oil Plus 2C.

Coverage: All Colors - 1L / 200 sq ft.

Spend $79.00 to Free Shipping
ADDITIONAL
HOW TO APPLY
TECHNICAL
Video
MAINTENANCE
CUSTOMER REVIEWS
ADDITIONAL

Precolor Easy

  • Available in 14 colors
  • Mix colors to create your own unique look.
  • Water-based wood stain
  • Use with Rubio Monocoat Oil 2C for to create contrast and highlight the natural beauty of the wood.


Rubio Fumed

  • Provides a "greying" or aged effect to oak wood
  • Tannin-reactive
  • Environmentally friendly: releases no toxic fumes or vapors
  • Post-treat with Rubio Monocoat Oil 2C for distinct effects on wood.

Rubio Smoke

  • Provides a similar aspect as an ammonia-smoking treatment.
  • Tannin-reactive
  • Environmentally friendly: releases no toxic fumes or vapors.
  • Post-treat with Rubio Monocoat Oil 2C for distinct effects on wood.

Creative Effects Brochure

HOW TO APPLY

Coverage: All Colors - 1L / 200 sq ft.

Precolor Easy

Furniture and stairs 

  1. Sand the surface scratch-free. Finish with screening net 100 to 150, the color intensity depends on the sanding method used. 
    • When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.). 
  2. Vacuum thoroughly and eliminate remains of dust with Rubio Monocoat Cleaner. Wait until the surface is completely dry
    (check the technical datasheet of the Cleaner before use). 
  3. Stir the product thoroughly and regularly with a stirring stick. 
  4. Apply an amount of Rubio Monocoat Precolor Easy with the Rubio Monocoat Brush and spread out using a red Rubio Monocoat Scrubby Pad. Wipe out evenly with a lint-free cloth. Work in small areas to avoid overlapping.
    • For smaller objects and corners you can also use the green Rubio Monocoat Mouse Pad. 
  5. Allow the surface to dry for ± 12 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation. 
  6. After drying, break the raised wood fibers with a red Scrubby Pad and vacuum afterwards. 
  7. Now apply the Rubio Monocoat Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application. Be careful, in combination with Precolor Easy it is best to use a white Scrubby Pad instead of a beige or red one when applying the oil.

Floors 

  1. Sand the surface scratch-free. Finish with screening net 100, the color intensity depends on the sanding method used. 
    • When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.). 
  2. Vacuum thoroughly and eliminate remains of dust with Rubio Monocoat Cleaner. Wait until the surface is completely dry
    (check the technical datasheet of the Cleaner before use). 
  3. Tape off areas of ± 90 cm, in the lengthwise direction of the boards. 
  4. Stir the product thoroughly and regularly with a stirring stick. 
  5. Apply the Rubio Monocoat Precolor Easy with a Rubio Monocoat Microfiber Pad. Make sure to use enough of the product and cover the whole area. Afterwards smooth out the area again with the same Microfiber Pad. Make sure that this pad is thoroughly wrung out. 
  6. Now skip an area and follow the instructions in step 5 again for this next area. Finish the whole room in this way and remove the tape. Allow the surface to dry for ± 12 hours. 
  7. Now tape off the untreated areas and apply the Precolor Easy as described in step 5. Repeat until the whole floor is treated. Afterwards remove the tape
    (tip: step on the already dried-out areas to remove the tape). 
  8. Allow the surface to dry for ± 12 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation. 
  9. After drying, break the raised wood fibers with a floor polisher equipped with a red Rubio Monocoat Pad and vacuum afterwards. 
  10. Now apply the Rubio Monocoat Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application. Be careful, in combination with Precolor Easy it is best to use a white Pad instead of a beige or red one when applying the oil! 

Tips & Tricks

  •  Stir the product well before application. 
  • When using several containers at one site, it is required to mix them for an even result. 
  • Switch off the floor heating 48 hours before application. 
  • Do not use in combination with water-based finishing products, such as Rubio Invisible Protector. 
  • Difficult to apply on herringbone parquet. 
  • Keep in mind that the wood type, grain structure and porosity of the wood can influence the end result. Therefore, it is important to make a sample first on the chosen wood species or the surface that needs treating.  

Precolor Easy Application Instructions and TDS Download (EN)

Precolor Easy Application Instructions and TDS Download (ES)

 

Rubio Fumed

Manual Application

  1. Sand the planks until the desired effect has reached.- Remove any dust.
  2. Apply RMC Fumed regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  3. Let the surface dry completely (12 to 48 hours).
  4. Sand the surface lightly with a polisher equipped with a beige pad.
  5. Remove any dust again.
  6. Finish with Rubio Monocoat Oil

Consumption
Depending on type of wood and preparation:  +/- 215 to 430 g/sq. ft. 

These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.  

Application Instructions and TDS (EN)

Application Instructions and TDS (ES)

 

Rubio Smoke

Manual Application

  1. Sand the planks until the desired effect is reached.
  2. Remove any dust.
  3. Apply RMC Smoke regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  4. Wash off the excess product with water and a sponge, go over the surface and wring the sponge with the absorbed product out in the second bucket.
  5. Let the surface dry completely (12 to 48 hours).
  6. Sandpaper the surface lightly with a polisher equipped with a beige pad.
  7. Remove any dust again.
  8. Finish with Rubio Monocoat Oil.

Consumption
Depending on type of wood and preparation:  +/- 215 to 430 g/sq. ft. 

These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage. 

Application Instructions and TDS (EN)

Application Instructions and TDS (ES)

 

TECHNICAL

Precolor Easy

Summarized specifications, please read TDS before using product.

Spread Rate: 150-200 ft²/L
Dry Time: Varies. Test with a moisture meter before and after to ensure full dry.
VOC Content: 0%
Color Options:14
Dilutable: With Water
Shelf Life: 12 months
Warning: Do not allow to freeze


Rubio Fumed

Summarized specifications, please read TDS before using product.

Spread Rate: 200-400 ft²/L
Dry Time: Varies. Test with a moisture meter before and after to ensure full dry.
Dilutable: With Water
Shelf Life: 12 months
Warning: Do not allow to freeze


Rubio Smoke

Summarized specifications, please read TDS before using product.

Spread Rate: 200-400 ft²/L
Dry Time: Varies. Test with a moisture meter before and after to ensure full dry.
Dilutable: With Water
Shelf Life: 12 months
Warning: Do not allow to freeze

Video

Precolor Easy

Rubio Fumed

MAINTENANCE

Precolor Easy

Precolor Easy is a pretreatment and designed to be used with Oil Plus 2C for complimentary color effects and optimal protection and longevity of the wood.

Rubio Fumed

Rubio Monocoat Fumed is a pre-treatment and should be finished with Oil Plus 2C.

Clean with Soap or Surface Care Spray. Maintain color and protection with Universal Maintenance Oil. Refresh and restore with Renew.

Rubio Smoke

Rubio Monocoat Smoke is a Creative Effects pre-treatment and should be finished with Oil Plus 2C.

Clean with Soap or Surface Care Spray. Maintain color and protection with Universal Maintenance Oil. Refresh and restore with Renew.

CUSTOMER REVIEWS

This site uses cookies to ensure that we give you the best experience on our website.

Rubio Monocoat Creative Effects Sample Kit

Rubio Monocoat Creative Effects Sample Kit

$260.00