Rubio Monocoat Hybrid Wood Protector Sample Kit
Rubio Monocoat Hybrid Exterior Wood Protector is an ecological protective coating for new and weathered wood. Protects against fading and wood rot for siding, decks, shutters, doors, garden furniture, pontoons, etc. Guaranteed application in only one layer. Easy to maintain - renovation without the need for sanding. Does not form a film layer. Does not flake.
Consult the full instruction and technical sheet before using this product.
- RMC technology uses integrated UV* stabilizer, which protects your wood from the sun's harmful rays.
- Eco-friendly 0% VOC product. Does not contain any water or solvents.
- Suitable for almost all types of wood and can also be used on interior wood applications!
- Available in 22 exciting and unique colors.
- Easy to apply. Fast-drying.
- Economical: minimum consumption.
- Not film-forming. Does not flake off.
- Maintenance with the same product. No need for sanding!
*Pure does not contain UV stabilizers and will not provide color stability against the natural aging of wood.
Note: Pure is non-pigmented. Natural is pigmented with yellow/white tones.
Consult the full instruction and technical sheet before using this product.
EXTERIOR
- Remove all residues of old applications. Clean the surface using RMC Exterior Wood Cleaner.
- Stir the oil thoroughly before use.
- Once the cleaned surface is dry, apply a layer of RMC Hybrid Wood Protector with a flat brush.
- Leave to react for 10 minutes. Smooth the surface again with the same brush (without applying new product).
- After 5 minutes wipe off traces of excess product with a piece of cloth.
- Let dry for about 24 hours. Complete curing takes place after 7 days.
Tips
- The preparation always has to be done with RMC products.
- Never apply in direct sunlight and at temperatures under 10ºC.
- Only work when weather conditions are dry.
- Do not cover and do not place heavy objects on the wood until completely dry.
- Horizontal surfaces need to be rubbed dry if they are exposed to rain within 24-36 hours after applying the oil.
INTERIOR
- Sand according to NWFA guidelines. Vacuum thoroughly, eliminate remains of dust with RMC Cleaner.
- Carefully add 10% of RMC Accelerator Comp. B to the oil. Stir thoroughly before use.
- Once the cleaned surface is dry, spread out a small quantity of the product with a cloth or brush.
- Leave to react during a few minutes.
- Thoroughly remove all excess of oil with a cloth. The surface should feel dry!
- Let dry for about 24 hours. Complete curing takes place after 7 days.
ATTENTION
The product must not be diluted under any circumstances.
Cloths that are soaked in oil may spontaneously combust and must therefore be submerged in water after use.
INDUSTRIAL APPLICATION
If you want to apply this product in an industrial manner, we advise you to get in contact with our technical care team. The technical data sheet for industrial use is available on demand.
For industrial applications, it is obligatory to add 10% of RMC Accelerator to the RMC Hybrid Wood Protector.
Summarized specifications, please read TDS before using product.
Spread Rate: 250-300 Sq ft/L
Cure Time: 7 days
VOC Content: 0%
Color Options: 22
Dilutable: No
Shelf Life: 36 months
Warning: Do not allow to freeze
Warning: Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
Rubio Monocoat Hybrid Wood Protector makes providing rich color and UV protection to wood floors easy.
Application, maintenance, and refreshment are done with the same product. Because of a revolutionary molecular bonding technology, Hybrid Wood Protector will not overlap or show starting marks.
No need to sand when refreshing UV protection and color, simply reapply using the application instructions.