Rubio Monocoat Wood Cream

Manual application 

A. On new wood

1.  Prepare the surface in order to achieve the desired result (planed, sanded, wire brushed…). 
2. Remove sanding dust from the surface and wipe dry. 
3. Stir Rubio WoodCream well before applying it (undiluted). 
4. Apply carefully and evenly, to the vertical surface with a block brush suitable for water-beading products. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent. 
5. In case a more opaque result is desired, you can apply a second layer after at least 3 hours. Since the first layer is already water-repellent, the second layer will not adhere to the first layer as easily. We recommend spreading the product with the block brush on the first layer in one smooth movement and going over it several times. 

a. Creating an aged/transparent effect on new wood 

1. Prepare the surface in order to achieve the desired result (planed, sanded, wire brushed…). 
2. Remove sanding dust from the surface and wipe dry. 
3. Stir Rubio WoodCream well and dilute it with Rubio WoodCream Softener in order to create a more transparent effect (proportion: max 1:1). 
4. Apply carefully and evenly to the vertical surface with a block brush suitable for water-beading products. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent.
   
   

REMARK 

• In order to create an aged effect on new wood, a color from the Grey Collection must be diluted with Rubio WoodCream Softener. 
• In order to create a more transparent effect (when desired) a Rubio WoodCream color must be diluted with Rubio WoodCream Softener. Add Rubio WoodCream Softener until the desired effect is achieved. The maximum proportion is 1: 1. 
• In order to create a non-colored effect, you can use the color Transparent #0 (undiluted) from the Grey Collection. Though it has no UV-filter, it allows the wood to age naturally while still providing protection and water repellence.
  
  

B. In case of renovation/refreshing Rubio WoodCream 

1. Clean the surface by using water at low pressure and a soft brush; there is no need for sanding.  
2. Stir Rubio WoodCream well and dilute it with Rubio WoodCream Softener in a ratio from 9 parts Rubio WoodCream and 1 part Rubio WoodCream Softener. You can adjust this ratio to max. 1 part Rubio WoodCream and 1 part Rubio WoodCream Softener to achieve the desired result. 
3. Apply carefully and evenly to the vertical surface with a block brush suitable for water-beading products. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent.
   
   

C. In case of renovation on older non-Rubio products

1. In case of extremely soiled and oily wood or mildew stains, the wood must be cleaned with a mixture of 10%  Rubio Monocoat Exterior Wood Cleaner and water. The wood must be thoroughly rinsed with water after the use of  Rubio Monocoat Exterior Wood Cleaner and before application. Consult the accompanying technical data sheet before use.
2. Remove all loose coatings or wood fibers (sanding, steel, or brass brush). 
3. Remove sanding dust from the surface and wipe dry. 
4. Stir Rubio WoodCream well before applying it (undiluted), carefully and evenly, to the vertical surface with a block brush suitable for water-beading products. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent. 
5. Apply a second layer in order to prevent gloss differences between raw wood and patches where the old coating was still present. 

Industrial Application 

If you want to apply this product in an industrial manner, we advise you to get in contact with our technical care team. 

Storage 

The product can be stored up to 24 months. Store in dry conditions and in the original unopened packaging. Do not allow product to freeze. 

Consumption 

Depending on the type of substrate: 120-200 ft²/L (12-20 m²/L)

Download Application Instructions and TDS (EN)

Summarized specifications, please read TDS before using product.

Spread Rate: 120-200 ft²/L
Cure Time: Depending on Climate: ± 12 hours
VOC Content: 0%
Color Options: 27
Dilutable: Up to 1:1 using WoodCream Softener
Shelf Life: 24 months

Warning: Do not allow to freeze

Maintenance Instructions 

1. The wood must be cleaned with a mixture of 10% Rubio Monocoat Exterior Wood Cleaner and water. After the use of Rubio Monocoat Exterior Wood Cleaner, clean the surface by using water at low pressure and a soft brush; there is no need for sanding. Consult the accompanying technical data sheet before use. 
2. Stir Rubio WoodCream well and dilute it with Rubio WoodCream Softener in a ratio from 9 parts Rubio WoodCream and 1 part Rubio WoodCream Softener to max. 1 part Rubio WoodCream and 1 part Rubio WoodCream Softener in order to achieve the desired result. 
3. Apply carefully and evenly to the vertical surface with a block brush suitable for water-beading products. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent.

Maintenance Information 

In general we recommend a yearly visual check-up just after winter season.  Please check for the presence of the following three points: 

a. Dirt & green deposits; clean with low pressure water and soft brush 

b. Fading out of colors 

c. Diminishing water-beading effect If necessary (concerning point b./c.), apply a maintenance coat according to the instructions.

The frequency of maintenance depends on the weather conditions: 

• In normal weather conditions: every 5 years 
• In extreme weather conditions: every 3 years 
• In ideal circumstances, this can take significantly longer: up to 10 years 

Normal Climates:

when the color fades, apply a maintenance coat of Rubio WoodCream with Rubio WoodCream Softener in a ratio from 9 parts Rubio WoodCream and 1 part Rubio WoodCream Softener to max. 1 part Rubio WoodCream and 1 part Rubio WoodCream Softener to achieve the desired result.

Consult the technical data sheet for more information. 

Frequency

according to exposure, geographical situation, solar orientation of the treated wood, wood type, and desired shade. Waterfront, seaside, pilling, wetland, and marshland scenarios sometimes require more frequent maintenance.

 Tips & Tricks 

• Avoid direct sunlight on the surface. 
• In case of high temperatures (> 85°F / 30°C) or when there is no shade, we recommend diluting Rubio WoodCream with Rubio WoodCream Softener in order to make the product easier to apply and to allow it to dry less quickly. 
• On rough and very absorbent wood surfaces, we recommend diluting Rubio WoodCream with Rubio WoodCream Softener so you can easily apply Rubio WoodCream on the surface. For a more opaque effect you can apply a second layer. 
• Tools can be cleaned using water.