In stock
Out stock

Oil Plus 2C - 3.5 Liter



Hurry! Only 0 Left in Stock!

Spend $49.00 to Free Shipping
How to Apply

Oil Plus 2C is a hardwax oil wood protector that colors and protects in only 1 single layer! Using advanced molecular bonding, it protects wood from water, heat and daily wear & tear. It is the best oil for wood furniture, hardwood flooring, tables, and just about anything made out of wood!

  • Available in 55 standard colors.
  • Enhances the natural look and feel of the wood.
  • 0% VOC, does not contain any water or solvents.
  • Easy to maintain.
  • It’s a natural wood finish because the oil is made of linseed.
  • No overlaps or starting marks.
  • Minimal use/High coverage: 300 - 500 ft²/L.
  • Can be applied to almost all wood types.
  • Certified.
  • Great wear-, water- and heat resistance.
  • Very fast curing: 80% in 2 days.
  • A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and Rubio Monocoat Soap.




How to Apply

Applying Oil Plus 2C to Floors

  1. Sand the surface scratch-free according to NWFA guidelines, up to 120 grit.
  2. Vacuum thoroughly, then clean remaining dust using Rubio Monocoat Cleaner and wait until the surface is completely dry.
    (check the technical datasheet of Rubio Monocoat Cleaner before use).
  3. Stir the A component until a homogenous mixture is obtained. Carefully mix the two components (Part A & Part B), for 1 to 2 minutes, with a ratio of approximately 3 units A to 1 unit B.
  4. Apply the oil to the perimeter of the room. Remove excess oil using a clean terry cloth within 10–15 minutes.
  5. Working in 50-100 ft² sections (or areas you can complete within 10–15 minutes), wipe the oil onto the wood and use a white or red buffer pad to equally spread the oil. Continue spreading the oil until the buffer pad no longer forms oil/color rings. Complete steps 6 & 7 before starting a new section.

    *Spatula method: evenly spread Rubio Monocoat Oil Plus 2C with a stainless spatula.
  6. Allowing a reaction time of at least 3–5 minutes, use a clean white buffer pad to remove all excess oil off the 50-100 ft.² section.
  7. Thoroughly remove all excess oil within 10–15 minutes of initial application by placing a clean terry cloth under a clean white buffer pad. If needed, remove all excess oil from v-grooves/bevels and holes by hand.
  8. Continue working in zones you can complete within 10–15 minutes. The surface should be dry to touch upon completion

Applying Oil Plus 2C to Furniture

  1. Sand the surface scratch-free, up to 120 or 150 grit.
  2. Vacuum thoroughly, clean the surface with Rubio Monocoat Cleaner to remove any remaining dust, and wait until the surface is completely dry.
    (check the technical datasheet of Rubio Monocoat Cleaner before use).
  3. Stir the A component until a homogenous mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of approximately. 3 units A to 1 unit B.
  4. Spread out a small quantity of Rubio Monocoat Oil Plus 2C using the Rubio Monocoat Applicator Set
    *Spatula method: evenly spread Rubio Monocoat Oil Plus 2C with a stainless spatula in zones which can be finished within 15 minutes (including step 5)
    *For ceilings and walls, apply Rubio Monocoat Oil Plus 2C to the surface using a brush and spread using the Rubio Monocoat Applicator Set.
  5. Allow to react for 3–5 minutes. Wipe away all excess oil with a clean terry cloth. Within 10–15 minutes from initial application, perform a final pass using a clean terry cloth, ensuring all excess is thoroughly removed. The surface should be dry to touch upon completion.

Click here for downloadable version of application instructions.


Summarized specifications, please read TDS before using product.

Spread Rate: 300-500 ft²/L
Cure Time:
Within 5 days
VOC Content:
Color Options:
Shelf Life:
36 months

Warning: Cloths saturated with oil may spontaneously combust. After usage, they need to be soaked in water before disposable.


Vacuum your floor regularly to keep particles off the surface and to help to prevent scratches. We recommend cleaning your floor on an as needed basis with Rubio Monocoat Universal Soap, which is available in concentrate or as a ready mixed spray, Surface Care Spray.

These products do not contain any solvents or oil, so nothing is being added to the finish during cleaning.


Oil Plus 2C FAQs

Is there a clear Oil Plus 2C?

The color Pure contains no pigment. It will, however, enhance the wood's natural pigment and bring out the wood's natural beauty and slightly darken it, as any oil finish. Natural does contain a light colored pigment.

What is the difference between Oil Plus 2C and Oil Plus Part A only?

Rubio Monocoat Oil Plus 2C consists of 2 components. Part A and Part B.  Part A is the oil and Part B is the accelerator/hardener.  When Part B is used, the cure time is just 7 days.  Making it more suitable for use on floors or other surfaces that you desire a quick cure time.  A shorter cure time creates less chance of spotting, scuffing etc. Part A only is fully cured in 3 weeks

Curing Time Comparison

Oil Plus 2C (Part A & Part B combined)

  • 24 Hours: 60%
  • 48 Hours: 80%
  • 7 Days: 100%

Oil Plus - Part A without accelerator part B 

  • 24 Hours: 60%
  • 48 Hours: 80%
  • 21 Days: 100%

How can I add sheen to my oil finish?

Oil Plus leaves a natural, matte finish.  If you desire more of a sheen added, you can apply Universal Maintenance Oil over on top of the Oil Plus 2C finished surface.  This will increase the sheen level by 6-8%.  Universal Maintenance Oil should not be applied to raw, unfinished wood.

Can I put a polyurethane or lacquer topcoat over an Oil Plus 2C finish?

You will need to verify with the manufacturer of the polyurethane or lacquer to ensure adhesion, since Rubio Monocoat cannot guarantee other product lines.

Is 2C Oil Plus Food Safe?

Rubio Monocoat Oil Plus 2C is ideal for application on butcher block countertops, tabletops, charcuterie boards and other surfaces where food is involved, since it has been declared safe for use on food contact surfaces by an independent testing institute.   

However, it is not recommended for use on cutting boards or other boards that are used for cutting, since the oil bonds with the top microns or the wood and a knife can cut deeper than the product penetrates.  Leaving the wood exposed and susceptible to mold and/or bacteria growth.

Do I need to put a topcoat over Oil Plus 2C?

No, Rubio Monocoat Oil Plus, 2C does not require a topcoat due, thanks to the molecular bonding technology. This unique technology adheres the oil to the topmost fibers of the wood. Creating a durable finish that keeps the wood’s natural look and feel, without building up plastic layers on the surface, as occurs with traditional polyurethanes. In addition, there is no need to apply additional oil to the wood, as is necessary with traditional waxes or oils.

What types of wood can Oil Plus 2C be used on?

Rubio Oil Plus 2C can be used on all types of interior wood species. For outdoor wood, use Hybrid wood protector, or Wood Cream.

How do I know what color of Oil Plus 2C to use?

Rubio Monocoat Oil Plus 2C is available in 55 standard colors, which can be used alone, or custom mixed to create a one of a kind color.  Check out our color gallery to see an example of what the color would look like.  Of course, the color will look different on your particular wood, so it is important to create a sample before completing your project.

Do I have to remove the existing finish before applying 2C oil?

Oil Plus 2C needs to come in contact with raw cellulose in order to adhere to the wood fibers and work properly, so you must remove the existing finish before applying.

How many coats of Oil Plus 2C do I need to apply to my wood?

Only one coat is required. That is where the name "Monocoat" comes from. Mono=One.